Teenage Mutant Ninja Turtles
Technodrome Portal Room
I am going to build Technodromes Portal Room from the 80’s Teenage Mutant Ninja Turtles cartoon. This will be scaled to size of NECA’s recent 6.5″ range.
Building the Scene
I’ve cut the sides down and applied magnetic tape. I now have basic shape of the Portal Room to build upon.
Created the portal gate using strips of 10 mm foam board. Built the two nodes that sit either side of the gate, sanding down the front to give a solid look.
Built an over hang for the right wall using 6 mm foam board and hot glue. Using two vitamin tubes glued together to create a pipe running down to floor from it.
I scored in the metal plates I to the foam before adding in any more decorative parts.
Some details above the portal gate and built the first of two pieces of equipment to the left wall.
Built the console that sits at the mouth of the portal. Using a combination of 6 & 10 mm foam board, and making the console slightly taller than Krang. With the console made I have etched into it a pair of screens and metal panels.
The second tower is made similar to the first tower. The top is made from a muffin container.
I have made a round air vent using a pair of pastry cutter. This is glued to the conduit on the right wall.
I just have a couple of extra pipes to the right wall before completing this build and can start painting.
Painting the Scene
I have a applied a black undercoat.
Mixed up a medium grey for the walls, when it had dried I have started to use a light grey on the panels and pelmets of the towers. A little silver on the console to see what it looked like.
I’ve decided to go for a metallic look, similar to 2016 interpretation in the 3 part episode Wanted: Bebop and Rocksteady.
The two tall machines I’ve covered the darker grey with PlastiKote Pewter, which has given it a lovely metallic look. The gate I’ve painted in Chrome (was supposed to be silver) and the cables with Games Workshops Leadbelcher.
The walls have a coat of Pewter over them. A light blue was used as a highlighter for devices around the gate.
The floor has been given a coat of Pewter, along with the metal parts of the console. I have edged all metal surfaces with Games Workshops Stormhost Silver and glued the large computer console to the left wall. Edged the diorama with Chrome.
What remains to be done is the portal and to paint the outside of the diorama in black.
With the help of my daughter who assisted in painting portal effect. With this in place, it completes the build of my TMNT Technodrome diorama.
My final pictures to follow.