Eternia Ruin

Eternia Ruin

Keeping with the He-Man and the Masters of the Universe theme, I’ve put together another small landscape diorama drawing inspiration from the old Filmation cartoon series back in 1983.

Build

This build I wanted to be a simple landscape diorama, I cut a piece of 10 mm foam board to act as the base.  Then another piece of 10 mm which will be a broken wall, I’ve added three tabs to the bottom of the all which allow it to be allowed to slotted into the base.

Eternia in the 80’s cartoon, wood land area had a lot of huge, twisty trees of all sizes.  To make one of these for the size of this piece, I have taken a cardboard tube and wrapped it up in tin foil with enough excess to twist to a point.  I rolled up two more lengths of tin foils and wrapped them around the trunk like twisted branches.  This will be positioned behind the wall.

 

Build upon this basic design, I added a horizontal wall behind the first wall, a couple of tin foil boulders into the foreground.

 

 

 

I was looking at the walls and realised one layer of 10 mm was not enough, I cut another piece the same size as the long wall. Glued them together and then sanded it down, I will do the same with vertical wall this evening.

 The vertical wall, I added another 10 mm layer of foam board making it the same width as the horizontal wall.  Using the round sander on my rotary tool to weather both walls, lightly touching the wall faces with side of the spinning sander.

I laid a piece of 6 mm foam board on the base in front of the horizontal wall, marking out 2″ x 2″ slabs before setting to them with pottery tools, scoring imperfections into the slabs.

 

 

Turning the attention to tree and the boulders, I watered down filler and coated the mixture over the objects.  I poured the rest of the filler down the left side of the base and around the back.  I inserted the tree into the filler covered the damp filler with sand.  

 

Painting

Coating foil covered objects with filler mixed with water, then covering the vacant floor area with it also. I painted the floor area with a yellowish brown and the stump of the tree. I then started to layer the the full tree with darker tones of brown, finishing off with a shade of Agrax Earth shade. The tile floor and walls have been given a base grey coat. When it dried I start layering them.

 

Sprayed the ground with a light yellow, the paving and walls with a light blue/grey. While they were drying I took a wire brush to the small floor behind the horizontal wall. Going with the grain of the foam and scoring it to look like worn floorboards. Shade with Agrax Earth shade and airbrushed with a water down black acrylic.

 

All stone work was then dry brushed with Longbeard Grey. When it had dried grass tufts and moss where applied on the tree and in places on the diorama.

 

All that is left to do is paint round the base and take final pictures of this.

 

 

Final Pictures

 

 


 

Castle Room 1

Castle Room 1

Started on a small diorama piece for Bradford Unleashed, drawing inspiration from He-man and the Masters of the Universe.

Build

Made from foam insulation board, it’s scaled to fit Masters Of The Universe 5.5′ to the 7′ figures.

 

The external I’ve etched brick work similar to that of the 80’s Castle Grayskull play set. Internal I’ve etched my standard brickwork. The walls are made from one piece of board, cutting between the bricks to make two interlocking walls.

 

For the base I made three curved steps  leading towards the wall, then curved the corners.  A single pillar created and fitted into the corner.  With the external being based upon the 80’s toy, I’ve put in a small window for the Sorceress to view out of.  Stone slabs have been etched into the floor and steps.

 

Sanded down all edges and started playing with ideas on how this will look when it’s finished.

 

 Painting

With the build completed, it is time to start painting.  The base coat for the walls and floor were applied using a watered done mixture of white/black and touch of blue, applied using a sponge. 

 


 With the base coats dry, sponged over the walls with a water downed burnt umber mixed with yellow, dabbing the paint all over.  

 

The floor was given another grey coat using my airbrush, random flags were sprayed a darker grey.  Once dry it was dry brushed with Games Workshop Longbeard Grey to pick out all the detail.

The inside walls I gave another coat of grey using the airbrush, once dry it was dry brushed with Games Workshop Longbeard Grey to pick out all the detail.

 

The exterior walls where sprayed with a grey/brown solution, then random stones where sprayed different shades of grey.  Once dry it was dry brushed with Games Workshop Longbeard Grey to pick out all the detail.

Sword Casting

Now the diorama build is complete, I wanted to decorate one wall with two hanging swords.  I took casts of both Masters of the Universe Classics He-Man and She-Ra’s swords, since the swords are permanently fixed to walls I took half casts of each sword using blu-stuff to make the molds.

When it was safe to remove the curing swords from the molds, I trimmed the excess off and left them to finish curing. 

I base coated both the swords using Abaddon Black and did the same to a spare MOTU 200x golden sword of power.  All three swords where then base coated with Leadbelcher, layered with Runefang steel and edged with Stormhost Silver.

Turning my attention to plaque the classic swords were going to be mounted onto, a circle had been cut into a piece of 6 mm foam board.  I used a wire brush to make it look like it had been made from a piece of wood. Base coated with Rhinox hide, shades with Agrex Earthshade and the washed over with Mournfang brown.  Both half swords where glued into place and then mounted onto the wall.

 

I created a stone plinth for the 200x Sword of Power to stand in and to be freely seated  in the corner.  Painted with Mechanicus Standard Grey and then edged with Longbeard Grey, the sword was embedded into the stone.

 

Final Pictures